Viking F20481 - Manual (Page 15)

29 28
1
Install center hinges with Phillips screws.
Door Reinstallation
(French Door Bottom-Mount)
2
Place hinge side of refrigerator doors on center
hinge pins.
3
Install top hinges loosely with 5/16” hex head screws.
4
While holding refrigerator doors upright, tighten down
top hinges with 5/16” hex head driver.
5
Reconnect two-pin connector.
6
Replace top hinge covers.
1 2
Pull both rails out to full extension. Insert the screws in the top of the drawer front into the
slots in the drawer brackets.
3 4
Pull the drawer brackets toward you to position the
screw in the bottom of the drawer front into the
brackets. Repeat for both sides of drawer.
Completely tighten the four screws on both sides of
drawer.
Freezer Drawer Reinstallation
(Bottom-Mount)
5
Push drawer closed.