Vortex Media VTX 1000 User Manual
Interfacing to the soundstation vtx 1000, With vortex, Devices
Advertising
Table of contents
Document Outline
- Table of Contents
- Introduction
- Summary
- System Overview
- System Setup Directions
- 1.) Connecting a Microphone to a Vortex Device
- 2.) Connecting a Loudspeaker to a Vortex Device
- 3.) Connecting the SoundStation VTX 1000 to a Vortex Device
- 4.) Connecting a Subwoofer to a Vortex Device
- 5.) Connecting the Telephone line to the SoundStation VTX 1000 and a Vortex Device
- 6.) Verifying the Proper Firmware in the SoundStation VTX 1000 and the Vortex Device
- 7.) Configuring the SoundStation VTX 1000
- 8.) Connecting Other Sources to a Vortex Device
- 9.) Setting the Gain of the Vortex Device
- 10.) Enable VTX Mode in the Vortex Device
- 11.) Making a Test Call with SoundStation VTX 1000
- Vortex EF2280 Examples
- 8 Mics, 4 Loudspeakers
- 12 Mics, 8 Loudspeakers, 4 Zones Sound Reinforcement
- 16 Mics, 8 Loudspeakers, 2 Zones Sound Reinforcement
- Vortex EF2241 Examples
- Appendix A: Interface Module
- Appendix B: SoundStation VTX 1000 User Controls / LCD Layou
- Appendix C: Vortex Input Wiring
- Appendix D: Vortex Output Wiring
- Appendix E: Vortex Internal Amplifier Wiring
- Technical Support