Vortex Media VTX 1000 - Manual (Page 26)

V
ORTEX
O
UTPUT
W
IRING
B
ALANCED
I
NPUT
Connect the Positive conductor of the Vortex device to Pin 2 of the XLR connector, the Negative conductor
of the Vortex device to Pin 3 of the XLR connector, and the Shield of the cable to the only to the Vortex
device. Refer to Cable Drawing 1 in the Vortex Output Wiring section of the Appendix.
U
NBALANCED
I
NPUT
Connect the Positive conductor of the Vortex device to the Tip of the RCA connector and the Negative
conductor of the Vortex device to Shield of the RCA connector. The shield of the cable is not connected at
the unbalanced end. Refer to Cable Drawing 2 in the Vortex Output Wiring section of the Appendix.
9.) S
ETTING THE
G
AIN OF THE
V
ORTEX
D
EVICE
26