Vivitar DIGITAL VIDEO RECORDER DVR 943HDv2 - Manual (Page 11)

11
Using Your Digital Camcorder

Make sure the batteries have been inserted properly into your digital camera.
If your camera comes with a rechargeable lithium battery, make sure it is fully charged before
the first use.

Make sure a proper SD card has been inserted correctly into your camera.
Powering the camera ON
Press the Power button to turn your camera ON.
The camera will be in Video Capture mode to start.
Note: Once you flip open the LCD screen – your camera automatically turns on.
Powering the camera OFF
While the camera is on, you can press the Power button again at any point to turn your camera
OFF. You will see a “Goodbye” splash screen and then the camera will power off completely.
Note: Your digital camera also has an Auto Power Off feature that will automatically turn off
your camera after a specific period of time that your camera is on and left idle. The
Auto Power Off settings can be set from the Auto Power Off settings menu.
Also, once you close the LCD screen, your camera automatically turns off.
Changing Camera Mode
Your camera has three main modes:
1. Video Capture Mode - Use this mode to capture videos with your camera.
2. Photo Capture Mode - Use this mode to capture photos with your camera.
3. Playback Mode (for photos and videos) - Use this mode to view the photos and videos
you have already taken with your camera.