Vivitar DIGITAL VIDEO RECORDER DVR 943HDv2 - Manual (Page 5)

5
Initial Camera Setup
Installing the Battery Installing the Memory Card

Charge before using your camera for the first
time.
To Charge the Lithium Battery:
1. Power Off the camcorder.
2. Make sure the battery is inserted correctly.
3. Connect the camcorder with the USB cable
to the computer or supplied AC Adapter
(which you then plug into an electrical outlet).
4. Allow the battery to charge for at least 4
hours before using the first time.
5. The charge light will turn off when the
battery is fully charged.
Turning On the Camera Using the Camera

Important: You must
use a Class 4 SD card
or higher SD card
only.

Insert SD Memory
card (up to 32GB)
before use.