Vivitar DIGITAL VIDEO RECORDER DVR 943HDv2 - Manual (Page 37)

37
Beeping sounds will indicate the countdown until the photo is taken - according to the time you have
selected: 2 seconds, 5 seconds, or 10 seconds.
NOTE: The Self-Timer can also be quickly activated by simply pressing the joystick button LEFT.
1. Press the MENU button to open the menus for the current mode.
2. Press the joystick button LEFT or RIGHT to scroll and select the Self-Timer menu.
3. Press the joystick button UP or DOWN to highlight the desired menu option.
4. Press the OK button on the joystick to select and confirm the highlighted menu option.
5. A selected option icon will appear on the selected item.
6. Press the joystick button LEFT or RIGHT to select the next menu item.
7. Press the MODE button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen.
9. The Self-Timer is active for only the photo taken after the Self-Timer has been set.
Reset the Self-Timer for each separate photo when needed.
Anti-Shake Menu
The Anti-Shake feature reduces image corruption that can be caused by movement of the camera
while capturing the image.
1. Press the MENU button to open the menus for the current mode.
2. Press the joystick button LEFT or RIGHT to scroll and select the Anti-Shake menu.
3. Press the joystick button UP or DOWN to highlight the desired menu option.
4. Press the OK button on the joystick to select and confirm the highlighted menu option.
5. A selected option icon will appear on the selected item.
6. Press the joystick button LEFT or RIGHT to select the next menu item.
7. Press the MODE button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen.
9. Remember that this setting will be saved by your digital video camera until you manually change
the setting or restore the camera‟s default factory settings.