Configuring a radius server – D-Link DFL-2500 User Manual
Page 227
•
Source Network: lannet
•
Destination Interface core
•
Destination Network lan_ip
3.
Click OK
B. Set up the Authentication Rule
1.
Go to User Authentication > User Authentication Rules > Add > User Authentication Rule
2.
Now enter:
•
Name: HTTPLogin
•
Agent: HTTP
•
Authentication Source: Local
•
Interface: lan
•
Originator IP: lannet
3.
For Local User DB choose lannet_auth_users
4.
For Login Type choose HTMLForm
5.
Click OK
C. Set up an IP rule to allow authenticated users to browse the Web.
1.
Go to Rules > IP Rules > Add> IP rule
2.
Now enter:
•
Name: Allow_http_auth
•
Action: NAT
•
Service: HTTP
•
Source Interface: lan
•
Source Network: lannet_users
•
Destination Interface any
•
Destination Network all-nets
3.
Click OK
Example 8.3. Configuring a RADIUS server.
Web Interface
1.
User Authentication > External User Databases> Add > External User Database
2.
Now enter:
a.
Name: Enter a name for the server
b.
Type: Select RADIUS
c.
IP Address: Enter the IP address of the server, or enter the symbolic name if the server has been
defined in the Address Book
8.2.6. HTTP Authentication
Chapter 8. User Authentication
227