D-Link DFL-2500 User Manual
Page 315
•
NoLog – Does not log any connections; consequently, it will not matter if logging is enabled for
either Allow or NAT rules in the Rules section; they will not be logged. However, FwdFast,
Drop and Reject rules will be logged as stipulated by the settings in the Rules section.
•
Log – Logs connections in short form; gives a short description of the connection, which rule
allowed it to be made and any SAT rules that apply. Connections will also be logged when they
are closed.
•
LogOC – As for Log, but includes the two packets that cause the connection to be opened and
closed. If a connection is closed as the result of a timeout, no ending packet will be logged
•
LogOCAll – Logs all packets involved in opening and closing the connection. In the case of
TCP, this covers all packets with SYN, FIN or RST flags turned on
•
LogAll – Logs all packets in the connection.
Default: Log
LogConnections
Chapter 13. Advanced Settings
315