VIEWSONIC VS12276-1G - Manual (Page 18)

ViewSonic N2690w 16
TV Setting
（Available only under TV mode）
1. Auto Scan: To scan the channel saver automatically.
2. Manual search: Use left/right buttons to the display the following OSD Menu.
(1) Channel: To display current channel number.
(2) Channel’s name: To display current channel’s name.
(3) Frequency: To display current channel frequency
Manual fine-tuning method : Press the Up/Down key to select the frequency
option. The option will turn yellow. Then press the Left/Right key to
adjust the frequency or press the number keys on the remote control
directly to enter the fixed frequency to select the program you want to
watch.
Semi-automatic tuning method
: Hold down the Left or Right key for more than 3
seconds to enter the semi-automatic tuning state. When finding the
program signal, it will exit the semi-automatic tuning state automatically
and save the current program into the current number.
(4) Color system: To display the color standard of the current TV signal (display as
Auto after choosing Auto Save.)
(5) Sound system: To display the sound standard of the current TV signal (display as
Auto after choosing Auto Save.)
(6) Fine tuning: Use left/right buttons to fine tune the frequency. The range is from-
50～50