VIEWSONIC VS12276-1G - Manual (Page 9)

ViewSonic N2690w 7
Turn the TV on & Off
1. Power On :
Press the power button on the remote control or key to pad to turn it on.
2. Power Off :
Press the power button on the remote control or key to pad to turn it on.
3. LED Indicator
Lights up in Blue : the TV is turned on.
Lights up in red : the TV is in standby mode.
Overview the LCD TV & Connection
The Front of the Screen Introduction
Power: Turn the power on from standby mode or turn the power off
return to the standby mode.
Source:
Press this button to display selected source, press ▲ button
to select input source.
Menu: Press this button to display or exit the OSD menu.
CH:
When the OSD menu appears, press these two buttons to
select the item you want to execute; when no OSD menu
appears, use to change channels in TV mode.
Vol:
When the OSD menu appears, press these two buttons to
confirm the selected item; when no OSD menu appears, use
to adjust the volume.