VIEWSONIC VS12276-1G - Manual (Page 7)

ViewSonic N2690w 5
Getting Started
Congratulations on your purchase of a ViewSonic® LCD TV.
Important! Save the original box and all packing material for future shipping needs.
Package Contents
Your LCD TV package
includes:
• LCD TV
• Power Cord
• Warranty Card*
• Remote Control with batteries
• RF Cable
• ViewSonic User Guide
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before
installing the product to the wall, please consider the following guidelines:
z
Read the Important Safety Instructions, at the start of this manual.
z Do not install in a moist or wet environment. This equipment is intended for
indoor use.
z Do not install near heat source, or strong magnetic fields.
z Use only ViewSonic approved wall-mounting brackets to support the LCD TV
weight.
z Before attaching the wall mount plate to the back cover, ensure the product is
working.
z If your LCD TV is already set up for free-standing operation, you need to first
remove the stand before mounting the device to the wall.
To attach the wall-mount bracket to LCD TV safely, please use the following
guidelines:
z
Disconnect the power and any other cables that might hinder moving the LCD
TV.
z Set the LCD TV on a table or work surface, placing the screen face down on a
towel or woolen blanket to protect the screen surface from damage while
installing plate.
z Please refer the following steps to remove the stand.
1. Remove the base. It is attached to the stand with 4 screws.
2. Remove the 4 screws holding the stand to the hinge.
3. Remove the stand.