Wintal DVDRX160 - Manual (Page 16)

15
System Connection for recording external digital signals (Front Panel)
When connecting external signals, be sure to switch off the power source of the unit and other devices
Recording Mode g
Introduction
Th ere are various external signal inputs in the unit, including
S-Video
Composite Video
TV tuning
DV input
Stereo audio input
You can select any group of audio and video signals from these inputs for recording.
INSERTING A NEW DISC
Upon inserting a new disc, the unit needs to initialise the disc.
Please wait until this is fi nished to start recording!
Manual Recording
Recording Source
You can select which video input the unit should record from. Th
e following options are available
Tuner
Front CVBS (Composite)
Front S-VIDEO
DV Input
Press the SOURCE button (repeatedly) to change the video source and select one of the above.
Note: If you are recording from a rear source, make sure your audio connections are connected to the rear audio inputs.
If you are recording from a front source, make sure your audio connections are connected to the front audio inputs.
■
■
■
■
■
■
■
■
■
DV
IN/OUT
DVDRX160
USB FLASH DRIVE
CAMCORDER WITH IEEE1394 OUTPUT
DV AND USB INPUTS
Refer to the manual of your
mini fi rewire or usb device for
further instructions on how
to connect