Wintal DVDRX160 - Manual (Page 41)

40
CHANGE PASSWORD
1. Tt modify a password, use arrow button to Change password.
Press the SELECT button and a dialog box will pop up as shown in
the right chart.
2. Use arrow buttons to select the ‘Enter password here’ box and
enter the password with number buttons.
3. Use arrow buttons to select the ‘Input new password’ box, input
the new password with the number buttons Th
en input the new
password again with the number buttons in the ‘Input new again’
box
4. Use the arrow buttons to select the OK button. After setting the
authorisation level, each time the unit plays a disc of that level, a
password is required. If you forget the password, you can enter the
default password.
RESET TO FACTORY DEFAULT
1. In the General Settings menu, use the
▲ or ▼ button to select
the Reset to Factory Default item and press the SELECT button.
Th
e OSD will display as follows.
2. Use the
▲ or ▼ button to select OK.
3. Press the SELECT button to restore all default settings.
NOTE: If your unit suddenly doesn’t work properly, it is possibly
due to incorrect settings. Please try the Reset to Factory Default
function to see if the unit restores to its normal working status.
SCREEN SAVER
When the unit is idle (or without monitored output) for some
time, interesting pictures will appear automatically as a screen
saver.
1. In the General Settings menu, use the
▲ or ▼ button to move the cursor and select Screen Saver.
2. Press the SELECT button and the Screen Saver item will drop down a list as shown in the chart.
3. Use the
▲ or ▼ button to move the cursor, and select ON or OFF.
4. Press the RETURN button to return to the upper level menu and set up other items.