Wintal DVDRX160 - Manual (Page 20)

19
Set up the start time of the recording:
In the timer recording set up box, use the arrow buttons and
then press the SELECT button to highlight the Start option.
Enter a time between 0:00 and 23:59 with the number buttons
and press SELECT to confi rm.
Set up the end time of the recording:
Set the recording end time following the instructions above
after having highlighted the End option.
Set up the record title:
Use
▲ or ▼ to change letters and then press the SELECT
button to enter it.
After completing setup, highlight the OK button and press
SELECT.
Press the TIMER button to exit the timer recording setup
menu.
If the system is operating fi ve minutes before the scheduled
time for recording, an information box will pop up, prompting
you whether to start recording or not. To record, highlight OK
and press the SELECT button to confi rm.
If the information box is left unattended, the unit will
automatically record and will continue according to the set
schedule.
If the system is in standby status, it will enter the recording
mode automatically 3 minutes in advance and start recording
to schedule.
DELETING A TIMER RECORDING:
SELECT ANY TIMER RECORDING ITEM AND
PRESS THE ADD/CLEAR BUTTON TO DELETE IT
8.
9.
10.
11.
12.
13.
UP/ DOWN or 0~9 to change the value,
SELECT to confi rm the value.
Timer Recording Setup
Source
Record to
Quality
Mode
Date
Start
End
Title
CH029
HDD
SP
Once
21/09/06
0 0 : 2 4
0 0 : 2 4
My Title
OK Cancel