Wintal DVDRX160 - Manual (Page 35)

34
If you want to edit the channels stored, select ‘Modify Channel then press SELECT button to confi rm,. In the channel edit dailog box, use
the
▲ or ▼ button and the SELECT button to select and confi rm. Th e options are as follow :
Program Number! Current TV program number
Name: You can edit the program name displayed on screen using the
▲ or ▼ button to change the letter and SELECT button. Press
the
▲ or ▼ button to move the cursor.
Sound Mode: Use the
▲ or ▼ and SELECT buttons to select the local sound mode. ( In Australia use PAL B/G)
Search type: You can change the scan mode used during scanning. Frequency scans all frequencies in a manual scan; Channel: scans
by preset allocated channel in a manual scan.
Frequency: 551.3 MHz. When the search type is set to Channl, this item will be shown as the channel. Press the
◄ or ► button to
scan channels manually channel by channel.
Channel: CH006. When the serach type is set to ‘Channel’, this item will be shown as the channel. Press the
◄ or ► button to scann
channels manually by channel.
Fine Tuning: Use the
▲ or ▼ and SELECT buttons to select this item and press the ▲ or ▼ button to tune the frequency lightly.
Delete: Press OK delete current program
After the channel to information is modifi ed, select OK and press the SELECT button to confi rm. Th en return to the Channel Scan
menu.
Program Table
If you want to sort the order of various channels: select the Sort-option
in program table and operate as follows.
• In the dialog box box, press the
▲ or ▼ button to locate the channel
to be changed.
• Use
► arrow button to access the right dialog box then press SELECT to confi rm.
• Press the
▲ or ▼ button to move this channel to the desired location.
• Press the SELECT button to insert the channel. Th e original channel
at this location will move to the next location.
• Repeat as necessary when fi nished.
NOTE: Be sure to connect the antenna properly before the channel scan operation. Please see the Basic Information: System Connection
for Recording External Signals for reference.
■
■
■
■
■
■
■
■