Private lan, Protocol, Public lan – Westell Technologies Wirespeed 2100 User Manual
Page 107
030-300198 Rev. D
105
March 2003
WireSpeed Dual Connect NAT Router
User Guide
P
Private LAN
This page contains the settings that control how the ADSL router interacts with the local devices connected to the
router. It is not recommended that these settings be changed. The following settings are displayed.
Private LAN
Private LAN DHCP Server
Enable
Dynamic Host Configuration Protocol (DHCP) is an Internet standard that
allows the ADSL router to automatically assign IP addresses to devices
connected on the LAN network. It is advised that this is enabled for Private
LAN.
Private LAN Enable
This setting enables the Private NAT’ed interface. It is advised to leave this
enabled.
Modem IP Address
This controls the IP address that the ADSL router uses for local
communication.
Subnet Mask
This setting specifies the subnet mask to use to determine if an IP address
belongs to your local network.
DHCP Start Address (If
DHCP is enabled for
Private LAN)
This setting specifies the start of the IP address pool that the modem uses to
assign IP addresses to local devices.
DHCP End Address (If
DHCP is enabled for
Private LAN)
This setting specifies the end address of the IP address pool used for automatic
configuration of local devices.
DHCP Lease (If DHCP is
enabled for Private LAN)
This setting specifies the DHCP lease time.
Protocol
Protocol
Protocol
This screen informs the Router which networking protocol to use when
communicating with your ISP. Your ISP provides this information.
Public LAN
This screen contains the settings that control how the ADSL router interacts with the local devices connected to the
router. It is not recommended that these settings be changed. The following settings are displayed.
Public LAN
Public LAN DHCP Server
Enable
Dynamic Host Configuration Protocol (DHCP) is an Internet standard that
allows the ADSL router to automatically assign IP addresses to devices
connected on the LAN network. It is advised that this is enabled for Private
LAN.
Public LAN Enable
This setting enables the Public interface. This feature allows a global subnet to
exist behind your modem.
Modem IP Address
This controls the IP address that the ADSL router uses for local
communication.
Subnet Mask
This setting specifies the subnet mask to use to determine if an IP address
belongs to your local network.