Westell Technologies Wirespeed 2100 - Manual (Page 33)

030-300198 Rev. D 31 March 2003
WireSpeed Dual Connect NAT Router User Guide
7.5 Configuring NAT Service (optional)
The Westell Dual Connect Router features Network Address Translation (NAT), which supports protocols for
applications, games and VPN-specific programs. To use an application that utilizes NAT protocol, you must
configure your Router’s NAT settings. Select Service Configuration from the Configuration menu.
NOTE: Westell has developed an extensive list of NAT services and you may select any service from this list. By
selecting your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on your
Router are open and that the required application traffic can pass through your LAN. For a list of supported NAT
services, go to section 9.8 (NAT Services).
This screen allows you to attach a predefined NAT service to your default profile. Once you have selected a NAT
service from the Service Name pull-down arrow, click on enable.
If you clicked on enable, the following Host Service pop-up screen will be displayed. Click on OK. This will load
the new NAT Configuration and the settings will be saved automatically.