Westell Technologies Wirespeed 2100 - Manual (Page 63)

030-300198 Rev. D 61 March 2003
WireSpeed Dual Connect NAT Router User Guide
Service Configuration
The following settings will be displayed if you select Service Configuration from the Configuration menu.
Westell has developed an extensive list of NAT services and you may select any service from this list. By selecting
your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on your Router
are open and that the required application traffic can pass through your LAN. For a list of supported services, please
go to section 9.8 (NAT Services).
Current Profile
Displays the NAT (Network Address Translation) services that you have
selected.
Service Name Drop down selection menu of NAT (Network Address Translation) service you
can select to configure you Router.
Creating a New Service Profile
If you select new from the preceding Service Configuration screen, the Create new Service Profile? pop-up
screen will be displayed. Click on OK to begin creating your new NAT profile. Click Cancel if you do not want to
create a new NAT profile.
If you clicked on OK, the following screen will be displayed. Select “A New Service Profile #1” from the
Current Profile pull-down arrow.
NOTE: You may create up to four NAT profiles and attach an unlimited number of services to each profile.