Description of features, Typical components – Windsor Elevator User Manual

Page 4

Advertising
background image

4

DESCRIPTION OF FEATURES

Learn the location and function of all features before using your WINDSOR
Elevator. The dealer should explain the features and operating instruc-
tions once the elevator is installed. If the dealer did not explain this to you,
please contact them.

Landing Controls: Located near the landing door, used to “call” the car
to that floor. An optional key switch limits use to authorized persons
only. Full operation is explained later.

Car Controls: Located in the car, used to send the elevator to the opposite
floor. An optional key switch limits use to authorized persons only.

Light Switch: Located on top of the car's control panel, it is provided to
switch the car light on and off.

Emergency Stop Button: Located on the car's control panel, it is
provided to stop the car's movement and sound an audible alarm in the
event of an emergency. Full operation is explained later.

Car Top Switch: A run/stop switch is provided on the car top for use
when servicing the elevator.

Pit Switch: A run/stop switch is provided in the hoistway at the lower
landing for use when servicing the elevator.

Telephone Jack: A telephone jack is provided inside the car. A
telephone must be acquired locally.

Scissors Car Gate: Gate manually slides open and closed. The gate
includes sensor switches that will not allow the elevator to run when the
gate is not fully closed or if the gate encounters an obstruction during
travel.

Manual Lowering Device: A handwheel is provided to manually move
the car in the event of a power failure. Full operation is explained later.

Hoistway Door Interlocks: Electric strike interlocks are provided at
both hoistway doors to prevent the door from being opened when the car
is not in proper landing position. Full operation is explained later.

Advertising