Windsor Elevator - Manual (Page 7)

7
-MANUAL LOWERING DEVICE:
In the case of a power failure, the car can be manually raised or lowered
using the manual lowering device (handwheel) as follows:
If drive cables are slack, do not attempt to raise or lower
the car. Immediately call your local Access Industries'
dealer for emergency assistance.
1) If controls are equipped with a key switch, turn all key switches to
the “ OFF ” position and remove keys.
2) Remove power from the drive unit at the disconnect switch. This is
very important, in case power is unexpectedly restored.
3) Insert the manual lowering device through the access hole in the wall
and place onto the motor shaft.
4) Rotate the manual lowering device in the desired direction to raise
or lower the platform.
WARNING
MANUAL LOWERING DEVICE
POWER UNIT
ASSEMBLY
MOTOR SHAFT IS
INSIDE THE HOLE
IN THE END OF THE
MOTOR