Weider Pro 4950 831.14623.0 - Manual (Page 10)

10
7. Attach the RIght Top Frame (4) to the Right
Upright (2) with two M8 x 80mm Bolts (100),
two M8 Washers (103), and two M8 Nylon
Locknuts (78).
Do not Tighten the Nylon
Locknuts yet.
7
4
78
78
2
103
103
100
8. Attach the Left Top Frame (126) to the Rear
Upright (121), the Left Upright (120), and the
Right Top Frame (4) with six M8 x 80mm Bolts
(100), six M8 Washers (103), and six M8 Nylon
Locknuts (78).
Do not tighten the Nylon
Locknuts yet.
8
126
103
100
100 100
103
78
78
121
120
78
4
78
9. Orient the Weight Guides (18) with the indicated
holes toward the floor. Attach a Weight Guide to
the Bottom Center Base (147) with an M10 x
82mm Bolt (84), two M10 Washers (80), two
20mm Steel Spacers (108), and an M10 Nylon
Locknut (77).
Do not tighten the Nylon
Locknut yet.
Attach the other Weight Guide (18) in the same
manner.
Do not tighten the M10 Nylon
Locknut yet.
9
18
80
80
77
84
108
108
147
18
Holes