Weider Pro 4950 831.14623.0 - Manual (Page 12)

12
12. Attach Leg Lever Bumper (75) to the Front Leg
(10) with an M4 x 16mm Self-tapping Screw
(110) and an M4 Washer (104).
Attach the Front Leg (10) to the Right Base (1)
with two M8 Nylon Locknuts (78) and the indi-
cated M8 x 75mm Carriage Bolts (83).
Do not
tighten the Nylon Locknuts yet.
13. Attach the Right Frame (9) to the Front Leg (10)
and the Right Upright (2) with two M8 x 65mm
Bolts (101), two M8 x 80mm Bolts (100), four
M8 Washers (103), and four M8 Nylon Locknuts
(78).
Do not tighten the Nylon Locknuts yet.
14. Attach the Left Frame (122) to the Left Base
(119) and the Left Upright (120) with two M8 x
80mm Bolts (100), two M8 Washers (103), four
M8 Nylon Locknuts (78), and the two indicated
M8 x 75mm Carriage Bolts (83).
Tighten all the M10 and M8 Nylon Locknuts
(77, 78) used in steps 3–14.
12
13
78
78
78
78
10
9
101
103
100
103
10
75
78
78
110
104
1
83
2
14
122
120
119
78
78
78
83
103
103
100