Whynter SNO ARC-13W/S - Manual (Page 10)

10
OPERATIONS
SWITCHING ON THE AIR CONDITIONER
The portable air conditioner can be switched on by the remote control or by pressing the On/Off button on the control
panel. Without using the remote control, the unit can only be switched on the Comfort (automatic) function.
To transmit signals from the remote control to the air conditioner, point the front part of the remote handset towards the
control panel on the air conditioner. Reception of the signal is confirmed by a beep. The maximum signal transmission
distance is approximately 8 meters / 26 feet.
NOTE:
•
Other appliances in the same room controlled by a remote control (TV, radio, stereo, etc.), may cause
interferences.
•
Electronic and fluorescent lamps may interfere with the signal transmissions between the remote control and the air
conditioner.
•
Remove the batteries if the remote control is not used for long periods.