Whynter SNO ARC-13W/S - Manual (Page 19)

19
Setting the On/Off times of the 1
st and 2 nd Function Programs
(PROGR. 1 and PROGR.2)
To set the air conditioner On/Off times for the two programs proceed
as follows (Fig. 16):
• To set the start time of the 1
st program
- Press the T6 Set Time and Program button repeatedly until the
PROGR.1 (D8) symbol with a vertical line on the left appears on the
display (the start time of the 1
st program) is displayed.
- Press the T7 + /- button to set the time (0:00 – 23:30) when you
want the 1
st program to start. The timer interval is 30 minutes.
• To set the stop time of the 1 st program
- Press the T6 Set Time and Program button again. PROGR.1 (D8)
symbol with a circle on the right (the stop time of the 1
st program)
will appear on the display.
- Press the T7 + /- button to set the time (0:00 – 23:30) when you
want the 1
st program to stop. The timer interval is 30 minutes.
• To set the start time of the 2nd program
- Press the T6 Set Time and Program button repeatedly until the PROGR.2 (D9) symbol with a vertical line on the left appears on the
display (the start time of the 1
st program) is displayed.
- Press the T7 + /- button to set the time (0:00 – 23:30) when you want the 2nd program to start. The timer interval is 30 minutes.
• To set the stop time of the 2nd program
- Press the T6 Set Time and Program button again. PROGR.2 (D9) symbol with a circle on the right (the stop time of the 1
st program)
will appear on the display.
- Press the T7 + /- button to set the time (0:00 – 23:30) when you want the 2nd program to stop. The timer interval is 30 minutes.
To active one or both function programs, press the T11 Enable Program button. To return to normal function mode, press the T6
button repeatedly until the program symbols disappear from the display.
Fig. 16