Whynter SNO ARC-13W/S - Manual (Page 14)

14
When the Comfort function is on, the compressor will stop when the temperature is below 72°F and the compressor will start when
the temperature is above 72°F.
Fig. 14
NIGHT COMFORT BUTTON (Button T3)
Press the T3 button to activate the night comfort function (Fig.14). In this function, the air conditioner gradually increases the set
temperature in cooling mode, decreases the noise level and conserves energy at night time. In cooling mode, the set temperature is
maintained for an hour after the Night Comfort function has been activated. In the next hour, the temperature is gradually increased
by up to 3°F. After the second hour, the temperature remains the same.
To activate the a Night Comfort function, first select the desired function mode by pressing the T4 button, program the desired
temperature settling by pressing the T7 (+ / -) button, then press the T3 Night Comfort button. The fan speed of the Night Comfort
function is at the lowest and cannot be changed.
The Night Comfort can be cancelled at any moment (ideally when you wake up) by pressing the T3 button. The temperature and fan
speed settings (programmed before the Night Comfort function was activated) will be restored.