Whynter SNO ARC-13W/S - Manual (Page 20)

20
ENABLING AND DISABLING THE FUNCTION PROGRAMS (Button
T11)
The function program(s) (either one or both) can be enabled or disabled
(Fig. 17).
- Press the T11 Enable Program button once and the 1
st program (D8)
is enabled. Press the T11 button again, the 2 nd program (D9) is
enabled.
- Press the T11 button again, the 1
st and 2 nd programs (D8 & D9) are
enabled.
- Press the T11 button again, both programs are disabled.
Fig. 17