Weider 831.159290 - Manual (Page 24)

24
60. Insert a 1/4” x 2 1/2” Carriage Bolt (60)
through the center hole in a Seat Plate (41).
Attach the Seat Plate to the Seat (17) with
two 1/4” x 3/4” Screws (59).
Insert the 1/4” x 2 1/2” Carriage Bolt (60)
through the indicated hole in the Front Seat
Frame (8). Tighten a 1/4” Nylon Locknut (44)
with a 1/4” Washer (37) onto the Carriage
Bolt.
Attach the other end of the Seat (17) to the
Front Seat Frame (8) with a 1/4” Washer (37)
and a 1/4” x 2 1/2” Machine Screw (64).
61. Attach the Small Backrest (18) to the Ab
Upright (1) with two 1/4” x 3/4” Screws (59).
62. Insert a 1/4” x 2 1/2” Carriage Bolt (60)
through the center hole in a Seat Plate (41).
Attach the Seat Plate to a Seat (17) with two
1/4” x 3/4” Screws (59).
Insert the 1/4” x 2 1/2” Carriage Bolt (60)
through the indicated hole in the Rear Seat
Frame (16). Tighten a 1/4” Nylon Locknut (44)
with a 1/4” Washer (37) onto the Carriage Bolt.
Attach the other end of the Seat (17) to the
Rear Seat Frame (16) with a 1/4” Washer (37)
and a 1/4” x 2 1/2” Machine Screw (64).
63. Press 3/4” Round Inner Caps (78) into the
ends of each Pad Tube (28).
Insert a Pad Tube (28) into the Leg Lever
Frame (30). Slide a Foam Pad (29) onto each
end of the Pad Tube.
Insert the other Pad Tube (28) into the Leg
Lever (15). Slide a Foam Pad (29) onto each
end of the Pad Tube.
61
62
SEA
T ASSEMBL
Y
17
59
60
8
37
44
41
64
59
1
18
17
59
60
16
37
44
41
64
60
30
15
78
29
28
29
63
78