Installation and 12 volt power, Assembling the windshield bracket—continued, Power connection – Whistler WGPX-635 User Manual
Page 16
16
Whistler WGPX-635/650
Assembling the Windshield Bracket—Continued
5. Finally, insert the GPS unit onto the cradle as shown below.
Important notes:
•
When using the windshield bracket, do not install in a location that will block the view of the driver.
•
Make sure to clean the windshield and suction cup to provide the best surface for adhesion.
•
Remove the protective plastic that may be on the suction cup
Power Connection
While the GPS is sitting in the cradle and the included power cord is plugged into both the unit and the cigarette
lighter, the battery is charging.
1. Insert the small plug into the power jack on the bottom of the unit.
2. Insert the other end of the power cord into the cigarette lighter.
Installation and 12 Volt Power
Flip
antenna up
Note: Power cord may not
look as pictured in manual.