Whistler WGPX-635 - Manual (Page 21)

21
Whistler WGPX-635/650
System Reset
In only three circumstances will it be required to reboot or reset the system. Reset the unit if any
of the following situations occur:
•
Heavy lag experienced with screen refresh or operations, resulting in an inoperable system.
•
Cannot turn off the system with power button.
•
No response with any selection on the screen.
Use the tip of the stylus and insert into the reset switch on back of the unit.
The system will immediately reset and reboot going to the touch screen calibration page. When
this page is completed successfully, the GPS warning page will be displayed. Once the warning
page is accepted, the unit is ready to use.
Operation
Use stylus to press the reset
button.