weber GENESIS 1500 LX - Manual (Page 21)

21
Step 14
Add base panel
You will need: Base panel.
Put the right side in and down, tilt and set the left side in
place. Figure 23.
Step 15
Install side panels
You will need: two side panels, and eight plastic buttons.
From the inside of the frame assembly, set the left side
panel in place between the side frame legs.
Notice that there are two sets of holes in each side
panel. Align the holes in the side panel to match the
holes in the left side frame legs. Push in the four plastic
buttons. Figure 24 (a).
Repeat with the right side panel.
Figure 23
Figure 24
(a)
Base panel
Left side
panel
top
bottom
Right side
panel