Install flavorizer bars and cooking grates, Install the bottom tray – weber GENESIS 1500 LX User Manual

Page 22

Advertising
background image

22

Step 17

Install the bottom tray

You will need: bottom tray, catch pan holder, catch pan
and one drip pan.

Figure 28

Figure 27

Figure 29

Bottom tray

Finger grip on front
edge of bottom tray

Finger grip

Front side of catch
pan holder

Step 16

Install Flavorizer Bars and Cooking Grates

You will need: five long Flavorizer Bars, eight short
Flavorizer Bars and two cooking grates.

Set the long Flavorizer Bars side to side in the lower
position, then set the short Flavorizer Bars front to back
in the upper position in the cooking box. Figure 25.

Figure 25

The open "U" of the cooking grates goes down. Set
the cooking grates onto the ledges in the cooking box.
Figure 26.

Figure 26

Hook the ends of the catch pan holder into the hole in the
bottom tray. Figure 28. The front of the catch pan holder
must be on the same side as the finger grip of the
bottom tray.

Slide the bottom tray onto the mounting rails under the
cooking box with finger grip toward you. Figure 29.

ƽ

CAUTION: Do not line bottom tray with aluminum

foil. It can cause grease fires by trapping the grease
and not allowing grease to flow into the catch pan.

Put the foil drip pan into the catch pan.

Slide the catch pan into the catch pan holder with its
finger grip towards you.

Advertising