Winegard TRAVELNET TN-2303 - Manual (Page 13)

Ver. 1.5
4/21/2009
- 13 -
5. Click Setup, click Wireless WAN in the Setup menu.
6. PSD Auto Connect select Always On
7. Do a hard restart of all network devices in order, first the TravelNet Cellular
Router, 2
nd
the WiFi Router, and finally laptop.
Activate your AT&T TravelNet Data/Voice (TN-2301) on the
AT&T Network Set Up Your TravelNet
Your AT&T TravelNet (TN-2301) requires a data plan for internet service and a voice
plan to connect the analog phone to . Locate the “Account Activation” Form (yellow
sheet), it has all the information the AT&T store will require to setup your account
and provide you a SIM card.
IMPORTANT: Power down your TravelNet system, and remove the green battery
pack from the battery compartment before attempting to install SIM.
1. Install the SIM Card into the SIM card holder in the battery compartment.
• If applicable, remove the SIM Card from the larger plastic card holding it.
• Remove the battery compartment door from your TravelNet unit.
• Carefully slide the SIM Card into the SIM card holder inside the battery
compartment.
It will slide lengthwise as shown below, with the gold contact surface facing into the
TravelNet and the corner notch matching the plastic SIM holder outline.