Wep key setup – Winegard TRAVELNET TN-2303 User Manual

Page 15

Advertising
background image

Ver. 1.5
4/21/2009

- 15 -

_

In a vehicle environment, grounding to the frame and battery or alternator

can reduce static or buzzing during voice calls.


Connect the Ethernet (RJ-45) cable to the Ethernet Port on the TravelNet D/V. (This
cable will serve as the connection to your computer or WiFi Router or other network
device in most configurations, including the primary Wireless WAN data connection.)


Setting Up WiFi Security on the Edimax BR-6204WG

Refer to the Edimax users guide CD for additional information.

Once you have an internet connection and an unsecure WiFi connection established
proceed to setup WiFi security for your Edimax router.

Figure 21


WEP Key Setup

Figure 22

1. Log into the Edimax WiFi Router at 192.168.2.1
2. Enter the Username ‘admin’ and Password ‘1234’
3. Go to WIRELESS SETTINGS > SECURITY
4. Encryption type: select WEP
5. Key Length: 64-bit
6. Key Format: Hex (10 Characters)
7. Default Tx Key: Key 1.
8. Encryption Key 1: Enter your 10 Characters Key- see chart below
9. Do not place an “x” in the selection box labeled “Enable 802.1x

Authentication” for normal installations. If there are any questions call
TravelNet Technical Support.

Advertising
This manual is related to the following products: