Winegard TRAVELNET TN-2303 - Manual (Page 8)

Ver. 1.5
4/21/2009
- 8 -
Connect Ethernet cable to the Ethernet
port on the TravelNet Network Port (as
shown) and to the Edimax WAN port (as
shown)
Antenna cables not shown for clarity.
Figure 12
6. Attach Phone Cable
Connect an RJ-11 Phone cable from a
standard phone to the Phone input (J1
Figure 13
7. Attach power cable
Connect the Power Supply Adapter to the unit’s Power Input and connect the
Power Line Cord to the Power Supply Adapter. Then, connect the Power Line Cord
plug into a power outlet
. When a 12 VDC source, order the appropriate pigtail
accessories and please save the 12 volt power supply for the coach owner. Note
that if using RV’s DC power, the power inputs are polarity sensitive. NOTE: The
lead with the white stripe is +12 VDC.