Weider 831.159390 - Manual (Page 25)

25
65. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in
HOW TO USE THE HOME GYM SYSTEM, beginning on page 26 of this manual.
Before using the home gym system, pull each cable a few times to be sure that the cables move smoothly
over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If
the cables are not properly installed, they may be damaged when heavy weight is used. See the
CABLE DIAGRAMS on page 30 and 31 of this manual for proper cable routing. If there is any slack in
the cables, you will need to remove the slack by tightening the cables. See TROUBLE-SHOOTING
AND MAINTENANCE on page 29.
64
BUTTERFLY
64. Remove the decals from the decal sheets (not shown) and apply them to the home gym system in the loca-
tions shown in the illustration below.
ARM
PRESS
LEG
PRESS
LOW PULLEY/ROW
LEG EXTENSION/CURL
AB
HIGH PULLEY
SERIAL NUMBER
DECAL