Weider 831.159390 - Manual (Page 27)

27
ATTACHING THE AB STRAP TO THE AB PULLEY
STATION
Attach the Ab Strap (35) to the Rear Cable (87) at the
ab pulley station with a Cable Clip (33).
ADJUSTING THE LEG LEVER
To change the height of the Leg Lever (15), remove
the Large Lock Pin (96) from the Rear Seat Frame
(16) and Leg Lever Frame. Position the Leg Lever
Frame at the desired height, align the holes in the
Rear Seat Frame and Leg Lever Frame and re-insert
the Lock Pin. Be sure that the hook on the Lock Pin
is clipped in place on the Rear Seat Frame. Also,
when the Leg Lever Frame is at the highest position,
you can use the upper foam pads to hold your legs in
place while you use the high pulley station.
ADJUSTING THE LEG PRESS PLATE
Remove the Small Lock Pin (73) from the Adjustment
Tube (10).
Align the holes in the Leg Press Arm (9) with the
desired set of holes in the Adjustment Tube (10). Re-
insert the Lock Pin (73) through the holes in the Leg
Press Arm and the holes in the Adjustment Tube. Be
sure that the hook on the Lock Pin is clipped in
place on the Adjustment Tube.
15
16
10
9
73
Hook
30
96
87
33
35
WARNING: The lock pin must always be inserted
through both the rear seat frame and leg lever
frame and clipped in place on the rear seat
frame.