Weider WESY19511 User Manual
Page 15
15
29. Press a 19mm Round Inner Cap (34) into each
end of both Pad Tubes (28).
Insert one Pad Tube (28) into the Seat Frame
(36). Slide a Foam Pad (30) onto each end of the
Pad Tube.
Insert the other Pad Tube (28) into the Leg Lever
(29). Slide a Foam Pad (30) onto each end of the
Pad Tube.
30. Attach the Preacher Pad (79) to the Preacher
Post (78) with two M6 x 16mm Screws (18).
29
30
34
28
34
29
78
79
18
30
36
30
31. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in
ADJUSTMENTS, beginning on the following page.
Before using the weight system, pull each cable a few times to be sure that the cables move smoothly over
the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the
cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE
DIAGRAM on page 20 of this manual for proper cable routing. If there is any slack in the cables, you
will need to remove it by tightening the cables; see TROUBLE-SHOOTING AND MAINTENANCE on
page 19.