Watts WATER CONDITIONER with WM100SM valve - Manual (Page 19)

19
CONTENTS
DRIVE CAP ASSEMBLY, DOWNFLOW PISTON, UPFLOW PISTON,
REGENERANT PISTON AND SPACER STACK ASSEMBLY
Drawing No. Order No. Description Qty.
1 KC12V3005 W100SM Spacer Stack Assembly 1
2 KC12V3004 Drive Cap ASY 1
3 KC12V3135 O-ring 228 1
4 KC12V3011 W100SM Piston Downflow ASY 1
5 KC12V3174 W100SM Regenerant Piston 3
6 KC12V3180 O-ring 337 1
Note: The regenerant piston is not used in backwash only applications.
Drawing No. Order No. Description Qty.
1 KC12V3176 Injector Cap 1
2 KC12V3152 O-ring 135 1
3 KC12V3177 Injector Screen 1
4 KC12V3010-12 W100SM Injector ASY Z Plug 1
5 KC12V3010-10 W100SM Injector ASY D Red 1
KC12V3010-IE W100SM Injector ASY E White 1
Not Shown KC12V3170 O-ring 011 *
Not Shown KC12V3171 O-ring 013 *
*The injector plug and the injector each contain one 011 (lower)
and one 013 (upper) o-ring.
Note: For upflow position, injector is located in the up hole and injector
plug in the down hole. For a filter that only backwashes injector plugs
are located in both holes.
INJECTOR CAP, INJECTOR SCREEN, INJECTOR, PLUG AND O-RING