weber 5000 - Manual (Page 28)

28
Step 31
Complete accessory installation
You will need: work table, serving tray, Warm-Up Basket,
warming rack, thermometer, two tubing plugs and a
hammer.
Insert one end of the Weber Warm-Up Basket into the
hole in the right end of the lid and the other end into the
slot in the left end of the lid. Figure 47 (a).
Set the work table onto the left side rails. Figure 47 (b).
Place porcelain serving tray on the work table.
Figure 47 (c).
Set the warming rack into the slots at the rear of the
cooking box. Figure 47 (d).
Insert the thermometer into its holder. Figure 47 (e).
Insert tubing plugs into the ends of the frame. To fully seat
the plugs, you may have to tap them lightly with a
hammer. Figure 47 (f).
Figure 47
(a)
(d)
(e)
(f)
(b)
(c)
ƽCAUTION: To keep the barbecue stationary, the
tabs on the locking casters should be in the down
position.