Worth Data 5000 - Manual (Page 45)

44
LCD Options
LCD OPTIONS
MASTER BACKGD, COLOR --- 1 1
PROMPT BACKGD, COLOR --- 1 2
PROMPT TEXT COLOR --------- 2 3
DATA BACKGD, COLOR -------- 1 4
DATA TEXT COLOR -------------- E 5
BRIGHTNESS --- LOW/MED/HIGH 6
BRIGHTNESS TIMEOUT -------- 05 7
DONE/EXIT ----------------------------- 0
CHANGE SETTING #: _
Master Background Color
Keying 1 allows you to change the Master Background Color of the TriCoder LCD – The default is 1 which is BLACK background.
Options are: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F - See the Color Chart below for color options.
Prompt Background Color
Keying 2 allows you to change the Prompt Background Color of the TriCoder – The default is 1 which is a BLACK background.
Options are: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F - See the Color Chart below for color options.
Prompt Text Color
Keying 3 allows you to change the Prompt Text Color of the TriCoder – The default is 2 which is BLUE text. Options are: 0, 1, 2, 3,
4, 5, 6, 7, 8, 9, A, B, C, D, E, F - See the Color Chart below for color options.
Data Background Color
Keying 4 allows you to change the Data Background Color of the TriCoder – The default is 1 which is BLACK background for all
entered data. Options are: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F - See the Color Chart below for color options.
Data Text Color
Keying 5 allows you to change the Data Text Color of the TriCoder – The default is E which is WHITE text for all entered data.
Options are: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F - See the Color Chart below for color options.
LCD COLOR CODE CHART
0 = AQUA 1 = BLACK 2 = BLUE 3 = FUCHSIA
4 = GRAY 5 = GREEN 6 = LIME 7 = MAROON
8 = NAVY 9 = OLIVE A = PURPLE B = RED
C = SILVER D = TEAL E = WHITE F = YELLOW
Brightness
Keying 6 allows you to change the Brightness of the LCD – The default is MED. Options are: LOW, MED, and HIGH. Changing
this setting has some effect on battery life.
Brightness Timeout
Keying 7 allows you to change the Brightness Timeout of the LCD – The default is 05 Seconds. Options are: 00-99. Changing this
setting has some effect on battery life.