Worth Data 5000 - Manual (Page 85)

84
FATAL ENTRY TYPE CANNOT
CONTINUE CYCLE POWER An invalid Entry Type has been
detected in your program. Cycle power
& see if it clears the error. This can be
caused by the TriCoder turning off
during programming. UNIT MAY NEED TO BE
RESET TO CLEAR ERROR
–
RESET PROGRAMS & DATA
IN SYSTEM SETUP & RESET
SETUPS TO DEFAULT - Call
for
support if condition
continues.
FATAL PROMPT #.
CYCLE POWER_
An invalid Prompt Number was
detected. Cycle Power and see what
happens. The Program was not
completed before turning the unit off, or
the memory is not reset after a
firmware update.
UNIT MAY NEED TO BE
RESET TO CLEAR ERROR
–
RESET PROGRAMS & DATA
IN SYSTEM SETUP & RESET
SETUPS TO DEFAULT - Call
for
support if condition
continues.
FILE USED BY Pn
HIT ANY KEY_
You have selected a data file # with data
in it, collected by another program. n=1-3.
Select another data file #. HIT ANY KEY. Select another
data file #.
IDENTIFIER ERROR
HIT ANY KEY_
You have entered data that doesn‟t
match the DATA ID specified. Re-enter your data or change
the DATA ID.
PROGRAM n INCOMPLETE
HIT ANY KEY_
Unit was shut off or went to sleep
during programming. Check program for errors.
UNIT MAY NEED TO BE
RESET TO CLEAR ERROR
–
RESET PROGRAMS & DATA
IN SYSTEM SETUP & RESET
SETUPS TO DEFAULT - Call
for
support if condition
continues
INVALID DATA LENGTH
HIT ANY KEY_
You have tried to enter 00 for Max Data
Length. Entry must be at least 01. HIT ANY KEY. Re-enter data
length.
INVALID INPUT DEVICE
HIT ANY KEY_
You have specified a character other
than K W or ENTER for the INPUT
DEVICE. HIT ANY KEY. Enter a valid
character.
INVALID FILE #
HIT ANY KEY_
You have entered a character other
than 0,1,2,or 3 at the Data File No.
Prompt. HIT ANY KEY. Enter a valid
number.
INVALID HEADER
HIT ANY KEY_
The Header Record in a table has an
invalid format. Check header record, fix and
retry.
INVALID PASSWORD
HIT ANY KEY_
You have not entered the correct
password. HIT ANY KEY. Enter the
correct password - WDTRI.
INVALID PROGRAM #
HIT ANY KEY_
You have entered something other than
0,1,2, or 3 in Programming Mode or
1,2, or 3 for Data Collection Mode HIT ANY KEY. Enter the
correct number.
ITEM NOT FOUND n
HIT ANY KEY_
An item entered in the TriCoder has not
been found in table n. HIT ANY KEY. Enter another
item number or check table
data.
NONPORTABLE MODE
PRESS <F1> TO EXIT
You are operating in Non Portable
mode - the TriCoder transmits data
immediately to the host computer
without saving in memory. Continue to enter data. Press
F1 to get to Mode Menu.
OUT OF MEMORY
HIT ANY KEY_
You have filled the memory and must
upload before you can collect any more
data. HIT ANY KEY. Upload data
and
continue with data
collection.
PLEASE ENTER
DIAG COMMAND_
TriCoder is in diagnostic mode, waiting
for a command. Enter the correct diagnostic
code or press F1 to exit.
Possible Data Loss
Press Any Key_
Slight memory error. Cycling Power on
the TriCoder may fix the problem.
Watch TriCoder closely. Can occur
after removing the battery UNIT MAY NEED TO BE
RESET TO CLEAR ERROR
–
RESET PROGRAMS & DATA
IN SYSTEM SETUP & RESET
SETUPS TO DEFAULT - Call
for
support if condition
continues.
PROGRAM n INCOMPLETE
HIT ANY KEY_
Unit was shut off or went to sleep
during programming or the program is
bad. Check program for errors.
UNIT MAY NEED TO BE
RESET TO CLEAR ERROR
–
RESET PROGRAMS & DATA
IN SYSTEM SETUP & RESET
SETUPS TO DEFAULT - Call
for
support if condition
continues
PROGRAMMING MODE --- 4 Do you want to write, edit, review or
delete a program? Press 4 at the Main Menu for
PROGRAMMING MODE.
PROGRAM NO.?
KEY [0-3]?_
You are in Data Collection mode and
need to select a program to use. Key 0, 1,2 or 3.
SEARCH PATTERN
_
The SEARCH key was pressed. Enter data to search for or
press ENTER key to exit.
Start Host USB
Firmware Download
Program First and
Then Hit Any Key.
Firmware download has been
requested. USB enumeration has been
completed. Now TriCoder is requesting
the user to start PC TriCoder Firmware
Downloader.
Start the Windows program,
TriCoder Firmware
Downloader. Available on
Utilities CD-ROM, or on
www.barcodehq.com.