Wells BWB-1S - Manual (Page 11)

9
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE REMEDY
WILL NOT HEAT Power switch not
ON
Turn switch to
ON
position
Power cord not plugged in Plug power cord into an energized
120V receptacle
Circuit breaker tripped Reset circuit breaker
Hi-Limit tripped Contact an Authorized Wells Service
Agency for repairs
Internal component damage Contact an Authorized Wells Service
Agency for repairs
DOES NOT MAINTAIN
Excessive carbonization of grids Clean grids
TEMPERATURE Internal component damage Contact an Authorized Wells Service
Agency for repairs
TRIPS CIRCUIT Too many appliances on circuit
Re-distribute appliances
BREAKER Have a licensed electrician
install a dedicated 20 Amp circuit
Internal component damage Contact an Authorized Wells Service
Agency for repairs
ALL OTHER Internal component damage Contact an Authorized Wells Service
PROBLEMS Agency for repairs