Wells BWB-1S - Manual (Page 9)

7
PREVENTATIVE MAINTENANCE PROCEDURES
A. TIMER ADJUSTMENT
TOOLS REQUIRED: Flat Blade Screwdriver - 1/32” x 1/8”
NOTE: The necessity to increase baking time may be due to carbon build-up on the grids. Always clean
and de-carbonize the grids prior to adjusting the timer.
1. Remove the hole plug from the rear panel of the Waffle Baker. DO NOT remove the hole plug from
the attached grounding wire.
2. Using the screwdriver, rotate the adjusting knob:
clockwise to increase time, or
counter-clockwise to decrease time.
B. DAILY CLEANING PROCEDURE
1. Allow the Waffle baker to cool to room temperature.
2. Clean grids by using a soft-bristle brush to remove all excess waffle residue.
3. Clean the outside of the Waffle Baker by wiping it with a soft, clean cloth, warm water and a mild
soap or detergent. NEVER USE AN ABRASIVE CLEANSER.
4. Always re-season the grids after cleaning.
.1
1
2
3
4
5
6
MINUTES
. 1
1
2 3
4
5
6
BACK
VIEW
CAUTION - ELECTRICAL SHOCK HAZARD
DO NOT SUBMERGE THE WAFFLE BAKER IN WATER.
If internal components become wet, the operator may suffer electrical shock,
and the Waffle Baker will be damaged.