Walker IMPLEMENT HITCH SB6670 - Manual (Page 72)

ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker ® replacement parts. Effective Date 06-01-01
72
IMPLEMENT HITCH ASSEMBLY
Implement Hitch
1 6627 PTO Shield 1
2 I392 Safety Chain Assembly 1
I015 Chain 1
O/L 5/16 Linchpin 1
O/L 5/32 x 1 Cotter Pin 1
3 5588 Rubber Bumper 1
4 I001 Quick Hitch 1
6625-1 Hitch Assembly, Male 1
5 O/L 9/16 ID Flat Washer 1
6 6621 Linear Actuator (11-3/4) 1
7 6630 Hitch Lift Crank 1
8 6621-1 Clevis Pin (1/2 x 2) 2
9 6624 Mounting Frame Assembly, Hitch 1
10 6618 Decal, Hitch Mount Adjust 1
11 6626 Pivot Shaft 1
12 5830-3 Grease Fitting (45 Degree) 2
13 5830 Grease Fitting 1
14 I393 Decal, Attaching Hitch 1
15 O/L 3/8-NC Nylon Locknut 1
16 I002 Quick Hitch Latch 1
17 O/L 3/8-NC x 1-1/2 Hex Bolt 1
18 O/L 3/32 x 3/4 Cotter Pin 1
19 I009 Attaching Lever 1
20 7860 Handle Grip 1
21 I005 1/4 x 1-11/16 Pin 1
22 NS Spring Plate (RAD 657383) 1
23 I008 Spring (1/4 x 1) 1
24 7822 Decal, PTO Shield 1
Fasteners
F002 10-24 Keps Nut 1
F005 1/4-20 ESNA Nut 2
F027 10-24 x 5/8 PPHMS 1
F036 1/4-20 x 1/2 SBH Screw 2
F068 1/8 x 1 Cotter Pin 6
F212 3/4-10 x 2 Hex Bolt 1
F213 3/14-10 Nut 1
NOTE: Decals are illustrated in greater detail in the Owner’s sec-
tion of this manual. Refer to SAFETY, CONTROL, AND
INSTRUCTION DECALS in Safety Instructions, Page
17.
NOTE: All NS items are listed with a RAD Part Number (e.g., RAD
657383), and are not sold by Walker Manufacturing. To
order these items, contact:
RAD Technologies Inc.
2835, Chemin de l’Aéroport
Thetford Mines (Québec)
G6G 5R7 CANADA
1-418-338-4499