Weider WESY29520 - Manual (Page 10)

10
16. Press a 2” x 2 1/2” Inner Cap (22) into the top of
the Leg Press Frame (30).
Lubricate a 3/8” x 3” Bolt (61) with grease. Attach
the Leg Press Frame (30) to the Left Base (2)
with the Bolt and a 3/8” Nylon Locknut (70). Do
not overtighten the Locknut; the Leg Press
Frame must be able to pivot easily.
14. Lubricate a 3/8” x 3” Button Head Bolt (97) and
both sides of two Plastic Washers (55) with
grease. Attach the Right Butterfly Arm (11) to the
Butterfly Frame (9) with the Bolt, the two Plastic
Washers, two Butterfly Caps (54), two 3/8”
Washers (75), and a 3/8” Nylon Jamnut (50). Do
not overtighten the Jamnut; the Butterfly Arm
must be able to pivot easily. Be sure the
indented sides of the Plastic Washers fit over
the welded bushing in the Butterfly Arm.
Repeat this step with the Left Butterfly Arm
(10).
9 10
11
97
54
54
55
55
Lubricate
Welded
Bushing
Lubricate
75
75
50
14
23
Lubricate
23
63
50
4
73
15
2
22
70
61
30
16
15. Press two 1 1/2” x 2” Inner Caps (23) into the
ends of the Leg Lever (4).
Lubricate a 3/8” x 2 1/2” Bolt (63) with grease.
Attach the Leg Lever (4) to the Right Leg (73)
with the Bolt and a 3/8” Nylon Jamnut (50). Do
not overtighten the Jamnut; the Leg Lever
must be able to pivot easily.
Lubricate