Weider WESY29520 - Manual (Page 19)

19
50. Press two 3/4” x 1 1/2” Inner Caps (103) and a
1 1/4” Square Inner Cap (104) into the Adjustable
Backrest Frame (100).
Attach a Backrest (15) to the Adjustable Backrest
Frame (100) with four 1/4” x 3/4” Bolts (13).
Insert the Adjustable Backrest Frame (100) into
the Right Upright (6) and secure it with an
Adjustment Knob (101).
Attach the other Backrest (15) and the Left
Upright (not shown) with four 1/4” x 3/4” Bolts
(13).
51. Slide the Long Pad Tube (17) through the hole in
the Right Leg (73). Slide two Foam Pads (18)
onto the ends of the Pad Tube. Press two 3/4”
Round Inner Caps (27) into the ends of the Pad
Tube.
Repeat this step with the Short Pad Tube (94)
and the Leg Lever (4).
52. Press a 2” x 2 1/2” Inner Cap (22) into the indicat-
ed end of the Adjustment Tube (88).
Attach the Leg Press Plate (31) to the Adjustment
Tube (88) with a 5/16” x 2 1/2” Bolt (89), two
5/16” Washers (26), and a 5/16” Nylon Locknut
(71).
Attach the Adjustment Tube (88) to the Leg Press
Frame (30) with the Leg Press Pin (87). Be sure
the Pin is in the locked position around the
Leg Press Frame.
49. Press two 3/4” x 1 1/2” Inner Caps (103) and a
1 1/4” Square Inner Cap (104) into an Adjustable
Seat Frame (99).
Attach a Seat (16) to the Adjustable Seat Frame
(99) with two 1/4” x 3/4” Screws (13), a1/4” x 1
1/2” Screw (90), and a 1/4” Washer (35).
Insert the Adjustable Seat Frame (99) into the
Right Seat Frame (5) and secure it with an
Adjustment Knob (101).
Repeat this step with the other Seat (16) and
the Left Seat Frame (not shown).
16
103
103
90
35
104
101
99
13
5
49
17
27
73
27
4
18
18
94
50
51
26
71
31
22
89
30
87
88
26
52
SEAT ASSEMBLY
101
104
103
100
103
6
15
13
13