Western Telematic IPS-400 - Manual (Page 13)

3-3
Quick Start
2. Test Switching Functions: You may wish to perform the following
tests in order to make certain that the IPS is responding to commands.
a) Reboot Outlet: If you are communicating with the unit via the
Web Browser Interface, select the button in the "Boot" column for
Plug 1, and then click on "Apply." If you are operating the unit
via the Text interface, type /BOOT 1 and press [Enter]. The
status indicator for Plug 1 should go off, pause for a moment,
and then go back on, indicating that the boot cycle has been
successfully completed.
b) Switch Outlet Off: From the Web Browser Interface, select the
button in the "Off" column for Plug 1, and then click "Apply."
From the Text Interface, type /OFF 1 and press [Enter]. The
status indicator for Plug 1 should go Off, indicating that the
command has been successfully completed. Leave Plug 1 in the
"Off" state, and then proceed to the next step.
Figure 3.1: Plug Status Screen - Web Browser Interface
Internet Power Switch v1.41d Site ID: (undefined)
Plug | Name | Password | Status | Boot/Seq. Delay | Default |
-----+------------------+-------------+--------+-----------------+---------+
1 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
2 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
3 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
4 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
-----+------------------+-------------+--------+-----------------+---------+
“/H” for help.
IPS>
Figure 3.2: Plug Status Screen - Text Interface