Western Telematic IPS-400 - Manual (Page 27)

5-11
Confi guration
5.3.3. Plug Parameters Menus
The Plug Parameters Menus are used to define Plug Names, Plug Passwords
and boot / sequence delay times for each of the IPS’s four Switched AC
Outlets.
• Web Browser Interface: Click the "Setup" button to access the
configuration menus, then click the "Plug Parameters" button. The
Plug Parameters Menu will be displayed as shown in Figure 5.7.
• Text Interface: Type /P n and then press [Enter] (Where n is
the number or name of the plug you wish to configure.) The Plug
Parameters Menu will be displayed as shown in Figure 5.8.
Figure 5.7: Plug Parameters Menu - Web Browser Interface
PLUG #3 PARAMETERS:
1. Plug Name: (undefined)
2. Password: (undefined)
3. Boot/Seq. Delay: 0.5 Secs
4. Power Up Default: On
Enter Selection,
Press <ESC> to Exit ...
Figure 5.8: Plug Parameters Menu - Text Interface