Western Telematic IPS-400 - Manual (Page 22)

5-6
IPS-400 / IPS-400-CE - User’s Guide
5.3.1. The General Parameters Menus
The General Parameters Menus allow you to select parameters such as the
System Password, User Name, Site I.D. and other options.
• Web Browser Interface: Click the "Setup" button to access the Setup
Menus, and then click the "General Parameters" button. The General
Parameters Menu will be displayed as shown in Figure 5.3.
• Text Interface: Type /G and press [Enter]. The General Parameters
Menu will be displayed as shown in Figure 5.4.
The General Parameters Menus offer the following options:
• System Password: The IPS will display a password prompt when
you attempt to access command mode. When the System Password
is entered at log on, the System Mode will be active, allowing access
to both switching functions and configuration menus. (16 Characters,
Default = undefined.)
Note:
If the System Password is not defined, then the IPS will
always start up in System Mode, and configuration functions will
then be available to anyone who accesses command mode.
Figure 5.3: General Parameters Menu - Web Browser Interface