Western Telematic IPS-400 - Manual (Page 25)

5-9
Confi guration
5.3.2. The Serial Parameters Menu
The Serial Parameters Menus are used to configure the IPS-400's serial
Console Port, and is used to select parameters such as the Baud Rate, Parity
and Modem Initialization String. To access the Serial Parameters Menu,
proceed as follows:
• Web Browser Interface: Click the "Setup" button to access the Setup
Menus, and then click the "Serial Parameters" button. The Serial
Parameters Menu will be displayed as shown in Figure 5.5.
• Text Interface: Type /C and press [Enter]. The Serial Parameters
Menu will be displayed as shown in Figure 5.6.
Figure 5.5: Serial Parameters Menu - Web Browser Interface
SERIAL PARAMETERS:
1. Baud Rate: 9600
2. Data: 8 Bit
3. Parity: None
4. Stop: 1 Bit
5. Port Mode: Console
6. Modem Init. Str: ATE0M0Q1&C1&D2S0=1
Enter selection,
Press <ESC> to return to previous menu ...
Figure 5.6: Serial Parameters Menu - Text Interface